Typical Applications
Fans, Motors, Pumps, Compressors, Centrifuges, Conveyors, Air Handlers, Gearboxes, Rolls, Dryers, Presses, Cooling, HVAC, Spindles, Machine Tooling, Process Equipment and many more.
Features
- Loop Powered
- Acceleration Output (Standard 10 Hz to 5.0 kHz)
- RMS or Peak Detection
- Side Entry, 2 Pin MS 5015 or 4 Pin M12 Connector
- Interfaces Directly to PLC/DCS Systems
- -13 to +248°F (-25 to 120°C) Temperature Range
- 1/4" x 28 UNF Captive Bolt
The CMCP422ATS-C Series are loop powered 4-20 mA output sensors which are capable of interfacing directly to an analog input card on a PLC or DCS system. The 4-20 mA output is proportional to the full scale range in terms of Acceleration (g's) and are capable of transmitting signals over a long distance without signal loss. The MS connector option allows the sensor to work with a separate cable assembly such as the CMCP602 series cables.
