Navigate to the STI Vibration Monitoring Inc. homepage

-
You are here: Home > New Products

STI is committed to providing our customers with new, innovative products to help enhance machine reliability. Below you will find a few of the new products which STI has recently released.
    CMCP7504 Four Channel Machinery Monitoring System

    CMCP7504 Four Channel Machinery Monitoring System

    • Compact Four Channel Monitoring System Plus Speed and Temperature
    • 4.3" LCD Bar Graph Display with Alarm Indicators
    • ModBus TCP/IP and RS485 Output
    • Individual OK, Alert and Danger Relay Outputs
    • Isolated 4-20mA Outputs
    • Local BNC Buffered Outputs
    • Configurable via USB
    • Raw Signal Saver for FFT/Waveform Viewing
    • AC or DC Powered
    $2,300.00
    Select Options
    Din Rail Mount BNC

    CMCP300E BNC Interface Module

    • Four Differential Inputs
    • Four Isolated Outputs
    • Din Rail Mounted (TS35 and TS32)
    • Screw Terminals
    • Compact Design
    • Low Cost
    $75.00
    CMCP-TKPC Pocket Calibrator

    CMCP-TKPC QuickClick Pocket Calibrator

    • Verify Proximity Probe Calibration
    • Small Portable 1.5” Dia. x 3.5” (38 x 89 mm)
    • 4 Sizes of Collets ¼”, 3/8”, M8 and M10
    • 4140 Steel, 0.938“ (24 mm) Dia. Target
    • Table or Magnetic Mount
    • Hard Carrying Case
    • Fits in your Briefcase or Backpack
    • English or Metric Micrometer
    • 5 mil or 0.1 mm Quick Click
    $595.00
    Select Options
    CMCP-TKPW Pocket Wobulator

    CMCP-TKPW-KIT Pocket Wobulator Test Kit

    • Compact, Battery Powered Wobulator
    • Compact Static Calibrator Included
    • For Use with Proximity Probe Systems
    • 4140 Steel Wobble Plate
    • 0-15 mil (0-381um) Dynamic Range
    • Collets for English and Metric Probe Sizes
    • Precision Dial Indicator
    • Variable Speed (0-7,000 RPM)
    • Tachometer and Key Phase Notch for Speed Probes
    • Includes Travel Case, Battery Pack, Charger and Mounting Magnet
    $3,050.00
    Select Options
    Handheld Vibration Pen

    CMCP630VP Portable Vibration Pen

    • Quick and Easy to Setup and Use
    • Backlit LCD Display for Low Light Conditions
    • Lightweight, Compact and Ergonomically Designed Case
    • Velocity, Acceleration and Displacement Measurements
    • Peak Hold Function
    • Stabilization Technology to Eliminate Hand Jitter
    • 30 Hour Battery Life (Continuous Use)
    • Rechargeable Battery
    • Conforms to ISO 20816-3 and 10816-3
    • Lanyard, Travel Case, Charger, Storage Bag and ISO 20816-3 Severity Chart Included
    $449.00
    Select Options
    CMCP700S, Slim Line, Dual output vibration and temperature transmitter

    CMCP700S-CVT Case Vibration and Temperature Transmitter

    • Vibration, Temperature and AC Signal
    • IEPE Accelerometer Input
    • 4-20mA Output for Vibration (Acceleration or Velocity)
    • 4-20mA Output for Temperature
    • Buffered Sensor Output (AC Signal)
    • Selectable Low Pass Filter
    • Selectable Full Scale Range
    • Selectable English or Metric Units
    • Can be Used As Standalone Vibration Transmitter

    $395.00
    CMCP460VT Triaxial 4-20 mA Velocity Sensor

    CMCP460VT Triaxial 4-20 mA Velocity Sensor

    • Three 4-20 mA Outputs (X, Y and Z)
    • Outputs in Velocity (in/s or mm/s)
    • Interfaces Directly to Control Systems (PLC’s)
    • ISO 10 Hz to 1 kHz Frequency Response
    • 120°C Max Temperature Range
    • Stainless Steel Case
    • 8 Pin M12 Eurofast Connector
    • Sealed to IP68
    $995.00
    Select Options
    CMCP-TKAT2 Portable Handheld Accelerometer and Cable Tester

    CMCP-TKAT2 Portable Handheld Accelerometer and Cable Tester

    • Verifies Sensor Bias Voltage
    • Verifies Cable Wiring
    • LCD Voltage Display
    • OK, Low and High LED Indicators
    • 9 V Battery Powered
    • 2-Pin MIL Connector for Quick Assessments
    • BNC Cable with Alligator Clips
    • Test Leads for Junction Boxes (BNC to BNC)
    • Includes Carry-On Pouch
    $449.00
    Fiberglass NEMA 4X BNC Switchbox

    CMCP320 Series Switchboxes for Online Systems

    • Compatible with Accelerometers and Dual Output 4-20 mA Sensors
    • Output Terminals for PLC or Online Systems
    • Switchable Output (Channels 1 thru 12)
    • MS 5015 2 Pin Connector and BNC Output
    • IP66, NEMA 4/4X Rated
    • Polycarbonate, Painted Steel or Stainless Steel Enclosure Options
    • Pluggable Terminal Strips
    $575.00
    Select Options
    CMCP7504M Channel Machinery Monitoring System

    CMCP7504M Machine Monitoring System

    • Continuous Monitoring for Machine Protection
    • Accepts 100mV/g and 500mV/g Accelerometers
    • Acceleration, Velocity and Demodulation for Bearing Condition
    • Speed and Temperature Input
    • Local Display with Bar Graphs
    • Local Alarm Indicators
    • 4-20mA, Relay and Modbus Outputs
    • Raw SignalSaver for FFT/Waveform Playback
    • Multi-Speed Alarming
    • BNC Buffered Outputs
    • Compact Din Rail Mountable Housing
    $3,595.00

Get access to the latest deals and more!