Navigate to the STI Vibration Monitoring Inc. homepage

You are here: Home > Mounting Hardware > Motor Fin Mounts
Motor Fin Mounts
When a good spot to mount an accelerometer is not available on an electric motor, STI’s CMCP205 Motor Fin Mounts may be the perfect solution. Selecting the proper Motor Fin Mount is accomplished by measuring the depth and width of the cooling fins where you want to locate the Accelerometer. The Motor Fin Mount needs to be long enough to directly contact the motor case between the fins. CMCP206 Adhesive filler is then used to hold the Motor Fin Mount in place. The thickness of the Motor Fin Mount should allow contact at the bottom and minimize the amount of adhesive needed.
About STI Vibration Monitoring Motor Fin Mounts
STI Vibration Monitoring's Motor Fin Mounts are revolutionizing the way accelerometers are mounted for vibration monitoring. These innovative mounts not only provide a secure and stable attachment for the accelerometers, but they also reduce the risk of interference from external vibrations. With their unique design and material composition, these mounts are able to withstand extreme conditions and provide accurate readings for long-term monitoring.
As the demand for precision and reliability in industrial applications continues to rise, our Motor Fin Mounts prove to be a game-changer for ensuring smooth and efficient operations. Say goodbye to the hassle of constantly readjusting or replacing mounts, and hello to reliable and consistent data collection with STI Vibration Monitoring's Motor Fin Mounts.
Click on the images below to view the product page.

    Motor Fin Mounts for Accelerometers
    • For Motor Cooling Fins
    • Available in Four Sizes
    • 1” (25.4 mm) Mounting Surface
    • 32 RMS Mounting Surface
    • 416 Stainless Steel
    • Will Attract Magnets
    • 1/4”-28 UNF Center Hole
    • Epoxy Mounted
    $30.00
    Adhesive Filler for Motor Fin Mounts
    • For Accelerometer Mounting
    • Anchors the Fin Mount between the Motor Cooling Fins
    • Requires CMCP207 Dispenser and CMCP208 Mixing Nozzles
    • For mounting CMCP205 Motor Fin Accelerometer Mounting Adapters
    • Tough fast curing structural adhesive
    $32.00
    CMCP207 Adhesive Dispenser
    • For Mounting Accelerometer Mounting Pads and Motor Fin Mounts
    • Efficient and Economical
    • Reusable
    • 1:1 Dispenser for CMCP206 and CMCP600E Adhesive Filler Cartridges
    • 4:1 Dispenser for CMCP201C Acrylic Adhesive Cartridges
    • Requires CMCP208 Mixing Nozzles
    $80.00
    CMCP208 Pack of 12 Mixing Nozzles
    • For Dispensing Cartridge Adhesives
    • Used with CMCP206 Adhesive Filler for Motor Fin Mounts
    • Used with CMCP210C Acrylic Adhesive Dispensing Package
    • Requires CMCP207 Adhesive Dispenser
    • Pack of 12
    $27.00

Get access to the latest deals and more!

Empty Cart